BLG -

Paul Ward Paul Ward

0 Course Enrolled • 0 Course Completed

Biography

Reliable JN0-363 Test Objectives - JN0-363 Test Questions Pdf

What's more, part of that Test4Sure JN0-363 dumps now are free: https://drive.google.com/open?id=1ObRJbpzwO073pEGQtCySInVaIATJ6WxS

You just need to get Test4Sure's Juniper Certification JN0-363 Exam exercises and answers to do simulation test, you can pass the Juniper certification JN0-363 exam successfully. If you have a Juniper JN0-363 the authentication certificate, your professional level will be higher than many people, and you can get a good opportunity of promoting job. Add Test4Sure's products to cart right now! Test4Sure can provide you with 24 hours online customer service.

The JN0-363 exam is a comprehensive assessment of a candidate's understanding of service provider routing and switching technologies, including Junos OS fundamentals, routing policy and firewall filters, MPLS and multicast protocols, and high availability and scaling techniques. JN0-363 Exam is available in English and Japanese and consists of multiple-choice questions, drag-and-drop questions, and simulation questions.

>> Reliable JN0-363 Test Objectives <<

JN0-363 Test Questions Pdf | Exam JN0-363 Overview

The software version of our JN0-363 study engine is designed to simulate a real exam situation. You can install it to as many computers as you need as long as the computer is in Windows system. With our software of JN0-363 guide exam, you can practice and test yourself just like you are in a real exam. The results of your test will be analyzed and a statistics will be presented to you. So you can see how you have done and know which kinds of questions of the JN0-363 Exam are to be learned more.

Juniper JN0-363 certification exam is a specialist-level certification offered by Juniper Networks. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification is designed for individuals who have a deep understanding of service provider routing and switching technologies. The JN0-363 Exam is an advanced-level certification that requires a thorough understanding of Juniper Networks technologies and products.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q23-Q28):

NEW QUESTION # 23
Click the Exhibit button.

Referring to the exhibit, which statement is true?

A. The router will prune links with insufficient bandwidth from the path before beginning the signaling process
B. The router will precalculate a valid path through the network for LSP r1-to-r3
C. The router will attempt to signal the LSP along the IGP shortest path to 192.168.100.1
D. The router will analyze the traffic engineering database to determine the best path through the network

Answer: A

NEW QUESTION # 24
You are bringing a new network online with three IS-IS routers using default Junos election priorities. The routers are configured as Level 2 only IS-IS routers. Which statement is true about the DIS election in this scenario?

A. The router with the lowest MAC address will be elected as the DIS.
B. The router with the highest numerical lo0 IP address will be elected as the DIS.
C. The router with the highest MAC address will be elected as the DIS.
D. The router with the lowest numerical lo0 IP address will be elected as the DIS.

Answer: C

Explanation:
A router's priority for becoming the designated router is indicated by an arbitrary number from 0 through 127, which you configure on the IS-IS interface. The router with the highest priority becomes the designated router for the area (Level 1, Level 2, or both), also configured on the IS-IS interface. If routers in the network have the same priority, then the router with the highest MAC address is elected as the designated router. By default, routers have a priority value of 64.
https://www.juniper.net/documentation/us/en/software/junos/is-is/topics/concept/routing-protocol-is-is-security-d

NEW QUESTION # 25
Click the Exhibit button.

Referring to the exhibit, if there is a connection failure between router1 and router2, how much time will pass before the devices declare the BFD session dead?

A. 1200 ms
B. 600 ms
C. 900 ms
D. 300 ms

Answer: C

NEW QUESTION # 26
Click the Exhibit.

On an MX Series device, you must enable routing between VLANs 100,200, and the Internet ge-5/1/0, and ge-5/1/2 are bundled into interface ae3. Ge-5/1/4, and ge-5/1/5 are bundles into interface ae2. Both AE bundles trunk VLANs 100 and 200.
In this scenario, what is the correct configuration snippet for VLAN 100?

A. interfaces {xe-2/1/0{unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0{unit 0{family inet {address 10.0.1.2/24;}}unit 1{family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;interface ip-0/0/0.0;}}
B. interfaces {xe-2/1/0 {unit 0 {family inet {address 10.0.10.2/24;}}}irb {unit 0{family inet {address 10.0.1.2/24:}}unit 1 {family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;}}
C. interfaces {xe-2/1/0 {unit 0{family inter {address 10.0.10.2/24;}}}irb {unit 0{family inet {address 10.0.1.2/24;}}unit 1 family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;routing-interface irb.0;}}
D. interfaces {xe-2/1/0 {unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0 {unit 0 {family inet {address 10.0.1.2/24;}}unit 1 {family inet {address 10.0.2.2/24;}}}} bridge-domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface xe-2/1/0.0;interface ae1.100;interface ae3.100interface ip-0/0/0.0;}}

Answer: B

NEW QUESTION # 27
Click the Exhibit button.

Referring to the exhibit, from which device(s) does R3 learn about Route X?

A. R2 only
B. both R2 and R1
C. R1 only
D. directly from the router in AS 64502

Answer: A

Explanation:
R2 can not forward IBGP learned routes to another IBGP neighbor correct R3 will learn about Route X from R2 only. R1 is in a separate AS and Route X is advertised to R2 through eBGP. R2 will then advertise the route to R3 using iBGP. R3 cannot learn routes directly from another AS without having a direct eBGP session with that AS.References:
BGP Route Propagation and Selection, Juniper Networks Documentation
Understanding iBGP and eBGP Route Distribution, Juniper Networks Documentation

NEW QUESTION # 28
......

JN0-363 Test Questions Pdf: https://www.test4sure.com/JN0-363-pass4sure-vce.html

P.S. Free & New JN0-363 dumps are available on Google Drive shared by Test4Sure: https://drive.google.com/open?id=1ObRJbpzwO073pEGQtCySInVaIATJ6WxS

Paul Ward Paul Ward

Biography

Links

Contact

Follow us on